Powerful fractional CO2 laser skin resurfacing machine with CE , ISO , SFDA approval F5 manufacturer from China Beijing Shijizhengfang Science & Technology Development Co., Ltd

$Powerful fractional CO2 laser skin resurfacing machine with CE , ISO , SFDA approval$

$Powerful fractional CO2 laser skin resurfacing machine with CE , ISO , SFDA approval$
$Powerful fractional CO2 laser skin resurfacing machine with CE , ISO , SFDA approval$

Powerful fractional CO2 laser skin resurfacing machine with CE , ISO , SFDA approval

Place of Origin:

Beijing, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: F5

Powerful fractional CO2 laser skin resurfacing machine with CE , ISO , SFDA approval

<p

Powerful fractional CO2 laser skin resurfacing machine with CE , ISO , SFDA approval

Quick Detail:

1, Remove scar, wrinkle, acne, pigment etc

2, 30W RF metal tube from USA

3, Self-calibration, no maintenance work

4, Medical CE approval

Principle:

Fractional Laser System fires a laser beam which is then split inti numbers f microscopic beams, producing tiny dot,or pixel-like treatment zones within the selected area of the skin,leaving the other zones within it perfectly intact. Therefore ,the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing , a great number of collagen is produced for skin rejuvenation. Eventually the skin will look much healthier and younger.

Applications:

1. Remove acne, acne scar, scar and so on;
2. Dispel wrinkle around the eyes, crow' s-feet, and wrinkle formed by lack of wate;
3. Effectively reduce the wrinkle on the face, forehead, the joints and striae gravidarum;
4. Dispel freckle, nevus zygomaticus and other spots formed by hyperchromic pathological changes;
5. Tighten skin and lift face;
6. Remove striae gravidarum and other deep scars.

Special features :

1. US-imported RF-CO2 laser generator, high quality excellent performance;
2. Excellent treatment results, perfect skin recovery in short time after treatment;
3. Humanized operation system and 8’ ’ color touch screen display;
4. Portable & smart design, easy for move and daily maintenance;
5. Smaller focal spot, stronger penetration and powerful output energy;
6. Best cost performance, designed for salons and clinics use;
7. Medical CE approval, ISO13485: 2003 and ISO9001: 2008.

Specifications :

Electrical Requirements	AC 110V± 10% 60Hz AC 220V± 10% 50Hz	Beam Delivery	7 joint arm
Wavelength	10600nm	Cooling	Air cooling
Aiming wavelength	635nm	Output mode	Continuous, super pulse, fractional
Focal Spot Diameter	0.2mm	Operating mode	Continuous, operation with, intermittent loading
Power of Aiming Beam	≤ 5mw	Whether Preview or not	Yes
Pulse Interval	1ms-5000ms, every stepping 1ms	Times of scanning	1th-20 th, every stepping 1th
Pulse Width	0.1ms-10ms, every stepping 0.1ms
Scanning Mode	Disorder emitting, to one side as the base emitting in order, emitting by maximum distance
Output Power	30W (RF metal tube from USA)
Output Pattern	Beeline, triangle, right square, rectangle, hexagon, rotundity, ellipse and so on
Spots Interval	0.1mm-2.6mm, every stepping 0.1mm
Pattern Size	Diagonal length from 0.1mm to 20mm is adjustable at random

Certificates :

Before and after treatment picture

Treatment interface

What type of anesthesia is used during the procedure?

The whole procedure is done under local or topical anesthesia. You are awake and comfortable the entire time. Prior to the procedure, topical numbing cream is applied for 60-90 minutes. In addition, valium is given prior to the procedure to facilitate relaxation. Using these measures there is usually minimal discomfort during the resurfacing procedure.